Tubo De Aço Inoxidável 304 VS 316 Tubo De Aço Inoxidável

No processo de fabricação de aço inoxidável, os graus utilizados são o tubo de aço inoxidável 304 e 316. O que torna estes tubos do aço inoxidável populares? Torna-se importante conhecer as diferenças e semelhanças entre essas duas variantes.

Semelhanças entre 304 tubos de aço inoxidável e 316 tubos de aço inoxidável.

Os tubos de aço inoxidável 304 e 316 usam o níquel para manter seus componentes em uma temperatura mais baixa. Aços austeníticos são bem conhecidos pela proteção contra corrosão, trabalhabilidade e resistência. As vantagens comuns de usar o aço inoxidável 304 e 316 são

• easy fabrication.

• easy finish and.

• easy to sanitize and clean.

difference of chemical properties between 304 and 316 stainless steel pipe

stainless 304 usually consists of 18% chromium and 8% nickel. stainless 316 is made up of 16% chromium, 10% nickel, and 2% molybdenum. there are 18% cr and 8% ni in 304 stainless steel. the content of cr in 316 stainless steel is less, about 15%, but ni is more, and mo will be added to the alloy.

mo is a kind of alloy element that can strengthen the hardness and strength of steel, which can make 316 stainless steel obtain better corrosion resistance. 304 stainless steel contains more cr, while 316 stainless steel contains more ni.

304 stainless steel pipe contains 18% cr, 8% ni.

316 stainless steel pipe contains 16% cr, 10% ni and 2% mo.

304 vs 316 stainless steel tube properties

both stainless 304 and stainless 316 have good durability, corrosion resistance, and rust resistance.

304 austenitic stainless steel has a wide range of uses and excellent corrosion resistance, while stainless 316 has higher corrosion resistance, especially in high corrosion environment, especially in chlorination environment and salt corrosion environment. in this kind of application, the service time of stainless 316 is longer than that of stainless 304.

304 vs 316 stainless steel pipe cost

the 304 stainless steel is less corrosive and is the lowest cost when compared to the counterpart. the 316 is expensive because it contains both molybdenum and nickel. though 316 is costly in the beginning, it can save money in the long run because it is less corrosive especially if the manufacturing unit is placing outdoors.